Automatic screen printing machine maintenance is an important work to ensure the normal operation of the machine and extend the service life. The following is the maintenance of automatic screen printing machine need to pay attention to some points.
1. Check and clean the machine:
Regular inspection and cleaning of the automatic screen printing machine is the key to ensure its normal operation. The ink residue on the plate, scraper and screen should be removed and cleaned thoroughly with a cleaner. You should also check the circuitry, switches and connectors on the machine and remove any dust or dirt.
2. Lubrication machine:
The lubrication of the automatic screen printing machine is the key to ensure smooth operation. Bearings, guides and other moving parts on the machine should be checked and lubricated regularly. Use appropriate lubricating oil or grease and lubricate as recommended by the manufacturer.
3. Replace wearing parts regularly:
Automatic screen printing machine has some wearing parts, such as scraper, scraper blade, screen and so on. These parts will be worn or damaged after a long time of use, and should be replaced in time to ensure the quality of printing. In addition, other vulnerable components, such as cylinder seals and motor relays, should be inspected and replaced.
4. Adjust machine parameters:
Some parameters of the automatic screen printing machine, such as printing speed, scraper pressure and printing pressure, may need to be adjusted according to printing needs.
5. Protect the machine shell:
Protecting the casing of the machine is the key to ensure that the machine is used for a long time. The enclosure of the machine should be cleaned regularly and covered with a dust shield or cover to prevent dust, moisture or other impurities from entering the machine. In addition, avoid exposing the machine to too high or too low temperatures, humidity, or direct sunlight.
6. Regular maintenance and maintenance:
In addition to the above daily maintenance work, regular maintenance and maintenance should also be carried out. This includes cleaning and calibrating individual parts of the machine, checking and replacing rubber pads, filters and other vulnerable parts, and checking and calibrating the machine's electrical system. In addition, specific maintenance and maintenance work can be carried out according to the manufacturer's recommendations, such as replacing oil seals and seals inside the machine.
7. Train and educate operators:
The correct operation of the automatic screen printing machine is essential for its normal operation and maintenance work. Therefore, operators should be trained and educated so that they understand the various parts of the machine, the operation process and maintenance points. The operator should also do a good job of daily cleaning of the machine and report any faults or abnormalities in a timely manner.
In short, maintaining the automatic screen printing machine is an important job to ensure its normal operation and extend its service life. Through regular cleaning, lubrication and replacement of wearing parts, adjustment of machine parameters, protection of the housing, regular maintenance and maintenance, and training and education of the operator, it is possible to ensure that the fully automatic screen printing machine is always in good working condition.
